Statement of Work - Attachment 15 - 01 35 26 - Governmental Safety Requirements
Updated
A Word document (52 KB) attached to JB Charleston Multiple Award Construction Contract, from the Department of the Air Force. Due Nov 2, 2026, 12:00 PM (UTC-5).
File name: Statement of Work - Attachment 15 - 01 35 26 - Governmental Safety Requirements.docx
The full file is for paid members, or buy this bid alone.
Preview
SECTION 01 35 26
GOVERNMENTAL SAFETY REQUIREMENTS
JB Charleston (Dec 2021)
PART 1 GENERAL
1.1 REFERENCES
The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.
ASME INTERNATIONAL (ASME)
ASME B30.3(2019) Tower Cranes
ASME B30.5(2021) Mobile and Locomotive Cranes
ASME B30.7(2021) Winches
ASME B30.8(2020) Floating Cranes and Floating Derricks
ASME B30.9(2021) Slings
ASME B30.20(2021) Below-the-Hook Lifting Devices
ASME B30.22(2016) Articulating Boom Cranes
ASME B30.23(2016) Personnel Lifting Systems
ASME B30.26(2015; Reaffirmed in 2020) Rigging Hardware
AMERICAN SOCIETY OF SAFETY PROFESSIONALS (ASSP)
ASSP A10.22(2007; R 2017) Safety Requirements for Rope-Guided and Non-Guided Workers’ Hoists
ASSP A10.34(2021) Protection of the Public on or Adjacent to Construction Sites
ASSP A10.44(2020) Control of Energy Sources (Lockout/Tagout) for Construction and Demolition Operations
ASSP Z244.1(2016; R 2020) The Control of Hazardous Energy Lockout, Tagout and Alternative Methods
ASSP Z359.0(2018) Definitions and Nomenclature Used for Fall Protection and Fall Restraint Standards
ASSP Z359.1(2020) The Fall Protection Code
ASSP Z359.2(2017) Minimum Requirements for a Comprehensive Managed Fall Protection Program
ASSP Z359.3(2019) Safety Requirements for Lanyards and Positioning Lanyards
ASSP Z359.4(2013) Safety Requirements for Assisted-Rescue and Self-Rescue Systems, Subsystems and Components
ASSP Z359.6(2016) Specifications and Design Requirements for Active Fall Protection Systems
ASSP Z359.7(2019) Qualification and Verification Testing of Fall Protection Products
ASSP Z359.11(2021) Safety Requirements for Full Body Harnesses
ASSP Z359.12(2019) Connecting Components for Personal Fall Arrest Systems
ASSP Z359.13(2013) Personal Energy Absorbers and Energy Absorbing Lanyards
ASSP Z359.14(2021) Safety Requirements for Self-Retracting Devices for Personal Fall Arrest and Rescue Systems
ASSP Z359.15(2014) Safety Requirements for Single Anchor Lifelines and Fall Arresters for Personal Fall Arrest Systems
ASSP Z359.16(2016) Safety Requirements for Climbing Ladder Fall Arrest Systems
ASSP Z359.18(2017) Safety Requirements for Anchorage Connectors for Active Fall Protection Systems
ASSP Z490.1(2016) Criteria for Accepted Practices in Safety, Health, and Environmental Training
ASTM INTERNATIONAL (ASTM)
ASTM F855(2020) Standard Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment
The beginning of the document. Download the full file to read on.
Other documents in this bid
- Solicitation
- Solicitation Attachment XU - Past Performance Customer Questionnaire
- Solicitation Attachment XV - Past Performance Survey
- Solicitation Attachment XW - JB Charleston MACC Work Load Estimate
- Solicitation Attachment XX - Task Order Proposal Request Seed Project
- Solicitation Attachment XY - On and Off-Ramp Procedures
- Statement of Work - JB CHS MACC
- Statement of Work - Attachment 1 - JB Charleston Statement of Work for (A E)
- Statement of Work - Attachment 10 - 01 33 00 - Attachment B - JB CHS Request for Information Form
- Statement of Work - Attachment 11 - 01 33 00 - Attachment C - Form (Submittal Register)
- Statement of Work - Attachment 12 - 01 33 00 - Attachment D - Form (Request for Information Register)
- Statement of Work - Attachment 13 - 01 33 00 - Submittal Procedures