Tab 4 - Appendix A-3 - CATM Effort General Requirments

United States Department of the Air Force

Air Force Civil Engineer Center

(AFCEC)

Enhanced Use Leasing Project
Davis-Monthan Air Force Base
Request for Lease Proposal (RFLP)
Appendix A-3
CATM Effort General Requirements

RFLP No. AFCEC-AFCEC-26-R-0003

Request for Lease Proposal No. AFCEC-26-R-0003
Davis-Monthan Air Force Base EUL
Appendix A-3

APPENDIX A-3

CATM CONCEPT DESIGN

This new CATM facility must include two (2) 50 meter by 50 meter small arms ranges supporting 5.56mm and 9mm zeroing, training, and qualification activities for both day and night. Ranges will be illuminated to 30 meters for night shooting. These ranges must be designed to contain the SDZ by providing berms on both sides and the downrange end and must incorporate a structure capable of preventing fired rounds from exiting the range (see conceptual plan) without being fully baffled. The design shall also incorporate materials that will not cause bullets to ricochet. These 50-meter ranges must each contain 28 covered firing points, an elevated tower for instructor observation and control, and adequate storage for essential range equipment. Additionally, the new CATM facility must include one (1) range capable of accepting up to 7.62mm training and qualifications to 800 meters and a width of 50 meters. The 800-meter range must have berms on both sides and the downrange end. The firing points must have an overhead structure capable of preventing fired rounds from exiting the range (see conceptual plan). The SDZ must be reduced to the 50-meter width of the range and 800 meters down range.
The range complex must also include one (1) 10,000 square foot administrative, classroom, armory, and range control facility. Training classrooms or areas must be capable of accommodating up to 30 students and associated instructor personnel, see attached conceptual plan which is attached as Appendix A-3c.

Request for Lease Proposal No. AFCEC-26-R-0003
Davis-Monthan Air Force Base EUL
Appendix A-3