Home / 612A4-27-018 | Replace B650 3rd and 2nd Flooring / Document

WALL AND DOOR PROTECTION

Updated

A PDF document (65 KB) attached to 612A4-27-018 | Replace B650 3rd and 2nd Flooring, from the Department of Veterans Affairs. Due Nov 24, 2026, 12:00 PM (UTC-8).

File name: 10 26 00 - WALL AND DOOR PROTECTION.pdf

Download the full documentSee the bid

The full file is for paid members, or buy this bid alone.

Preview

01-01-21

SECTION 10 26 00

WALL AND DOOR PROTECTION

PART 1 - GENERAL

1.1 DESCRIPTION

A. This section specifies wall guards, handrail/wall guard combinations, corner guards and door/door frame protectors and high impact wall covering.

1.2 RELATED WORK

A. Section 01 81 13, SUSTAINABLE CONSTRUCTION REQUIREMENTS: Sustainable

Design Requirements.
B. Section 05 50 00, METAL FABRICATIONS: Structural Steel Corner Guards. C. Section 08 71 00, DOOR HARDWARE: Armor plates and kick plates not specified in this section.
D. Section 09 06 00, SCHEDULE FOR FINISHES: Color and texture of aluminum and resilient material.

1.3 QUALITY ASSURANCE

A. Manufacturer’s Qualifications: Manufacturer with a minimum of three (3) years’ experience in providing items of type specified. 1. Obtain wall and door protection from single manufacturer. B. Installer’s Qualifications: Installers are to have a minimum of three (3) years’ experience in the installation of units required for this project.

1.4 SUBMITTALS

A. Submit in accordance with Section 01 33 23, SHOP DRAWINGS, PRODUCT DATA, AND SAMPLES.
B. Sustainable Design Submittals, as described below:
1. Volatile organic compounds per volume as specified in PART 2 PRODUCTS. 2. For composite wood products, submit documentation indicating product contains no added urea formaldehyde.
C. Shop Drawings: show design and installation details.

D. Manufacturer's Literature and Data:

1. Handrail/Wall Guard Combinations.
2. Wall Guards.
3. Corner Guards.
4. Door/Door Frame Protectors.
5. High Impact Wall covering.

10 26 00 - 1

01-01-21

E. Test Report: Showing that resilient material complies with specified fire and safety code requirements.
F. Manufacturer’s qualifications.
G. Installer’s qualifications.
H. Manufacturer’s warranty.

1.5 DELIVERY AND STORAGE

A. Deliver materials to the site in original sealed packages or containers marked with the name and brand, or trademark of the manufacturer. B. Protect from damage from handling and construction operations before, during and after installation.
C. Store in a dry environment of approximately 21 degrees C (70 degrees F) for at least 48 hours prior to installation.

1.6 WARRANTY

A. Construction Warranty: Comply with FAR clause 52.246-21 “Warranty of Construction”.
B. Manufacturer Warranty: Manufacturer shall warranty their wall and door protection for a minimum of five (5) years from date of installation and final acceptance by the Government. Submit manufacturer warranty.

1.7 APPLICABLE PUBLICATIONS

The beginning of the document. Download the full file to read on.

Other documents in this bid