Att Specifications- Resinous-Flooring 0003

SECTION 09 67 23 – RESINOUS FLOORING

PART 1 - GENERAL

1.1

SUMMARY

A.

1.2

Section includes Resinous Flooring in the restroom

RELATED SECTIONS

A.
1.3

Section 03 30 00 – Cast-In-Place Concrete.

REFERENCES

A.

ASTM International (ASTM):
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.

B.

Deutsches Institute fur Normung (DIN):
1.

C.

ASTM D 695 - Standard Test Method for Compressive Properties of Rigid Plastics. ASTM D1475 - Standard Test Method For Density of Liquid Coatings, Inks, and Related Products.
ASTM D 2047 - Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine.
ASTM D 2240 - Standard Test Method for Rubber Property—Durometer Hardness. ASTM D2369 - Standard Test Method for Volatile Content of Coatings. ASTM D 2370 - Standard Test Method for Tensile Properties of Organic Coatings. ASTM D 3960 - Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings.
ASTM D 4060 - Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser.
ASTM D5441 - Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography.
ASTM D 7234 - Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers.
ASTM F 1869 - Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride.
ASTM F 2170 - Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes

DIN 53460 – Testing of Plastics; Determination of the Vicar Softening Temperature of Thermoplastics.

International Concrete Repair Institute (ICRI):
1.

ICRI 310.2R - Selecting and Specifying Concrete Surface Preparation for Sealers, Coatings, Polymer Overlays, and Concrete Repair.

HAVO – 326181

110326

09 67 23- 1

RESINOUS FLOORING

D.

Military Specifications (MIL):
1.

E.

National Floor Safety Institute (NFSI):
1.

1.4

MIL-D-3134J - Deck Covering Materials.

ANSI/NFSI B101.1 - Test Method for Measuring Wet SCOF of Common Hard-Surface Floor Materials.

SUBMITTALS

A.

Product Data:
1.
2.
3.
4.

Manufacturer's data sheets on each product to be used, including properties, VOC content, wet static coefficient of friction, compressive strength, tensile strength, elongation and similar properties.
Preparation instructions and recommendations.
Storage and handling requirements and recommendations.