Home / ARSR4 Collector Power Supply Test Station Solicitation / Document

Attachment 3-6340 59 Repair Manual

Updated

A PDF document (4.1 MB) attached to ARSR4 Collector Power Supply Test Station Solicitation, from the Federal Aviation Administration. Due Nov 9, 2026, 2:00 PM (UTC-6).

File name: Att 3-6340_59 Repair Manual.pdf

Download the full documentSee the bid

The full file is for paid members, or buy this bid alone.

Preview

TI 634O.59

CONTROLLED

DOCUMENT

F_

-"

RNAL

REPAIR MANUAL

DEPOT MAINTENANCE

ARSR-4 SYSTEM

UUTs TESTED ON

COLLECTOR/PREAMP POWER

SUPPLY TEST SET

CONTRACT DTFA01-88-C-00037

CONTRACTOR

NORTHROP GRUMMAN CORPORATION

BALTIMORE, MARYLAND 21203

MADE FOR

U.S. DEPARTMENT

OF TRANSPORTATION

FEDERAL AVIATION ADMINISTRATION

S-_.\

(31 JULY 1998)

TI6340.59

INTRODUCTION

This repair manual consists of four separately-bound
manuals containing depot-level repair data for
units tested on the Collector/Preamp
Power Supply Test Set. This manual contains general repair data, specific repair data for each unit tested, and Appendix A, List of Acronyms and Abbreviations, in an 8 1/2-inch by 11-inch format. Appendix B, Assembly Drawings, is a separately-bound manual
in an 11-inch by 17-inch flat-pak format. Appendix C, Parts Lists, and Appendix D, Wire Data, are separately-bound
manuals in an 8 1/2-inch by 11-inch format.

(31 July 1998)

Uii

TI 6340.59

"

SAFETY

SUMMARY

SAFETY NOTICE

The attention of operating and maintenance personnel is directed to Federal Aviation Administration (FAA) Instruction 6000.15, Maintenance of Airway Facilities, for instructions on the subject of safety precautions to be observed, and to FAA Order 3900.0, Accident Prevention Handbook for Airway Facility Personnel. Personnel must observe the safety regulations at all times.

KEEP_AWAY FROM LIVE CIRCUITS

Hazardous voltages are present within units under test. Use extreme caution when removing or installing plug-in components or making adjustments. Under certain conditions, dangerous potentials may exist in circuits with power controls in the off position due to charges retained by capacitors. To avoid casualties, always remove power, and then discharge the capacitors with a grounding rod before touching any parts.

WARNINGS AND CAUTIONS

_-

Observe all warnings and cautions within this manual for maximum personnel and equipment safety.

PRECAUTIONARY

NOTICE1

SEMICONDUCTOR DEVICES/INTEGRATED

CIRCUITS

This equipment contains semiconductor devices that may be damaged by static discharge. Strictly adhere to the electrostatic discharge (ESD) precautionary measures within this manual before attempting to perform any procedure.

(31 Iuly 1998)

iii/iv

TI 6340.59

Paragaph

Title

CHAPTER

-

I - GENERAL

Page

INFORMATION

1.1

1-1

1.2
1.3
1.4
1.5
1.6
1.7
1.7.1
1,7.1.1
1.7.1.2
1.7.2
1.7.2.1
1.7.2.2
1.7.3
1.7.3.1
1.7.3.2
1.7.3,3
1.7,4
1.7.4.1
1.7.4.2
1.7.5
1.7.5.1
1.7.5.2
1.7.5.3

1-1
1-4
1-4
1-5

The beginning of the document. Download the full file to read on.

Other documents in this bid