Bid document
Updated
A PDF document (32 KB) attached to WWYK250063 - Install React VII Facility, B9001, Post V19, from the Department of the Air Force. Due Nov 2, 2026, 2:00 PM (UTC-6).
File name: 07 84 00.pdf
The full file is for paid members, or buy this bid alone.
Preview
Tinker AFB, OK
TAFB Technical Sprcifications 2019
SECTION 07 84 00
FIRESTOPPING
PART 1
1.1
GENERAL
SUMMARY
Furnish and install tested and listed firestopping systems, combination of materials, or devices to form an effective barrier against the spread of flame, smoke and gases, and maintain the integrity of fire resistance rated walls, partitions, floors, and ceiling-floor assemblies, including through-penetrations and construction joints and gaps.
a.
Through-penetrations include the annular space around pipes, tubes, conduit, wires, cables and vents.
b.
Construction joints include those used to accommodate expansion, contraction, wind, or seismic movement; firestopping material shall not interfere with the required movement of the joint.
Gaps requiring firestopping include gaps between the curtain wall and the floor slab and between the top of the fire-rated walls and the roof or floor deck above and at the intersection of shaft assemblies and adjoining fire resistance rated assemblies.
1.2
REFERENCES
The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.
ASTM INTERNATIONAL (ASTM)
ASTM E119
(2016) Standard Test Methods for Fire
Tests of Building Construction and
Materials
ASTM E1399/E1399M
(1997; E 2013;R 2013) Cyclic Movement and
Measuring the Minimum and Maximum Joint
Widths of Architectural Joint Systems
ASTM E1966
(2015) Fire-Resistive Joint Systems
ASTM E2174
(2014b) Standard Practice for On-Site
Inspection of Installed Fire Stops
ASTM E2307
(2015a) Standard Test Method for
Determining Fire Resistance of Perimeter
Fire Barrier Systems Using
Intermediate-Scale, Multi-story Test
Apparatus
ASTM E2393
(2010a) Standard Practice for On-Site
Inspection of Installed Fire Resistive
Joint Systems and Perimeter Fire Barriers
April 2019
SECTION 07 84 00
Tinker AFB, OK
TAFB Technical Sprcifications 2019
ASTM E699
(2009) Standard Practice for Evaluation of
Agencies Involved in Testing, Quality
Assurance, and Evaluating of Building
Components
ASTM E814
(2013a) Standard Test Method for Fire
Tests of Through-Penetration Fire Stops
ASTM E84
(2015b) Standard Test Method for Surface
Burning Characteristics of Building
Materials
FM GLOBAL (FM)
FM 4991
(2013) Approval of Firestop Contractors
FM APP GUIDE
(updated on-line) Approval Guide
http://www.approvalguide.com/
INTERNATIONAL CODE COUNCIL (ICC)
ICC IBC
(2015) International Building Code
UNDERWRITERS LABORATORIES (UL)
The beginning of the document. Download the full file to read on.