Bid document

Tinker AFB

Tinker General Requirements

SECTION 01 33 16.00 10

DESIGN DATA (DESIGN AFTER AWARD)

PART 1

1.1

GENERAL

SUMMARY

After award, develop the accepted proposal into the completed design, as described herein. Use a collaborative, integrated design process for all stages of project delivery with comprehensive performance goals for site development, energy, water, material selection, indoor environmental quality, and waste diversion. Ensure incorporation of these goals in project delivery. Consider all stages of the building lifecycle, including deconstruction, rehabilitation, re-purposing, or demolition. 1.2

REFERENCES

The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.

INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO)

ISO 19115-1

(2014) Geographic Information -- Metadata
-- Part 1: Fundamentals

ISO 19005-3

(2012) Document Management -- Electronic
Document File Format for Long-Term
Preservation -- Part 3: Use of ISO 32000-1
with Support for Embedded Files (PDF/A-3)

ISO 32000-1

(2008) Document Management -- Portable
Document Format -- Part 1: PDF 1.7

NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)

NFPA 13

(2019; Errata 19-1; Errata 19-2; TIA 19-1;
TIA 19-2; TIA 19-3; TIA 19-4; Errata 19-3;
Errata 20-4; TIA 19-5; TIA 19-6) Standard
for the Installation of Sprinkler Systems

NATIONAL INSTITUTE OF BUILDING SCIENCES (NIBS)

NCS

(V6) United States National CAD Standard

U.S. ARMY CORPS OF ENGINEERS (USACE)

EM 1110-1-2909

(2012) Engineering and Design -Geospatial Data and Systems

ERDC/ITL TR-12-1

(2015) A/E/C Graphics Standard, Release 2.0

ERDC/ITL TR-12-6

(2015) A/E/C CAD Standard - Release 6.0

January 2022

Section 01 33 16.00 10

Tinker AFB

Tinker General Requirements

U.S. DEPARTMENT OF DEFENSE (DOD)

UFC 1-300-02

(2014; with CHange 3, 2021) Unified
Facilities Guide Specifications (UFGS)
Format Standard

UFC 3-101-01

(2020; with Change 1, 2021) Architecture

UFC 4-010-01

(2018; with Change 1, 2020) DoD Minimum
Antiterrorism Standards for Buildings

UFC 4-023-03

(2009; with Change 3, 2016) Design of
Buildings to Resist Progressive Collapse

1.3
1.3.1

DEFINITIONS

Designer of Record (DOR)

Professional Registered members of the Contractor’s Design-Build team that check, approve, sign, date, and certify, prior to submitting the deliverables to the Government, that the D-B design submittals comply with the contract requirements.
The DOR's stamp, sign, and date each design drawing and other design