Bid document
Updated
A PDF document (38 KB) attached to WWYK250063 - Install React VII Facility, B9001, Post V19, from the Department of the Air Force. Due Nov 2, 2026, 2:00 PM (UTC-6).
File name: 08 51 23.pdf
The full file is for paid members, or buy this bid alone.
Preview
Tinker AFB, OK
TAFB Technical Sprcifications 2019
SECTION 08 51 23
STEEL WINDOWS
PART 1
1.1
GENERAL
REFERENCES
The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.
ASME INTERNATIONAL (ASME)
ASME B18.6.3
(2013) Machine Screws, Tapping Screws, and
Machine Drive Screws (Inch Series)
ASTM INTERNATIONAL (ASTM)
ASTM A1011/A1011M
(2015) Standard Specification for Steel,
Sheet, and Strip, Hot-Rolled, Carbon,
Structural, High-Strength Low-Alloy and
High-Strength Low-Alloy with Improved
Formability and Ultra-High Strength
ASTM A123/A123M
(2013) Standard Specification for Zinc
(Hot-Dip Galvanized) Coatings on Iron and
Steel Products
ASTM A653/A653M
(2015; E 2016) Standard Specification for
Steel Sheet, Zinc-Coated (Galvanized) or
Zinc-Iron Alloy-Coated (Galvannealed) by
the Hot-Dip Process
ASTM D3656/D3656M
(2013) Insect Screening and Louver Cloth
Woven from Vinyl-Coated Glass Yarns
ASTM E283
(2004; R 2012) Determining the Rate of Air
Leakage Through Exterior Windows, Curtain
Walls, and Doors Under Specified Pressure
Differences Across the Specimen
ASTM E330/E330M
(2014) Structural Performance of Exterior
Windows, Doors, Skylights and Curtain
Walls by Uniform Static Air Pressure
Difference
ASTM E331
(2000; R 2016) Standard Test Method for
Water Penetration of Exterior Windows,
Skylights, Doors, and Curtain Walls by
Uniform Static Air Pressure Difference
NATIONAL FENESTRATION RATING COUNCIL (NFRC)
NFRC 100
April 2019
(2014) Procedure for Determining
Fenestration Product U-Factors
SECTION 08 51 23
Tinker AFB, OK
NFRC 200
TAFB Technical Sprcifications 2019
(2014) Procedure for Determining
Fenestration Product Solar Heat Gain
Coefficient and Visible Transmittance at
Normal Incidence
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 101
(2015; ERTA 2015) Life Safety Code
NFPA 80
(2016) Standard for Fire Doors and Other
Opening Protectives
STEEL WINDOW INSTITUTE (SWI)
SWI SWS
1.2
(2005) Steel Window Specifications
SUBMITTALS
Government approval is required for submittals with a "G" designation; submittals not having a "G" designation are for Contractor Quality Control approval. Submit the following in accordance with Section 01 33 00
SUBMITTAL PROCEDURES:
SD-02 Shop Drawings
Windows
Indicate elevations of windows, full-size sections, thicknesses and gages of metal, fastenings, proposed method of anchoring, size
The beginning of the document. Download the full file to read on.