Bid document
Updated
A PDF document (182 KB) attached to WWYK250063 - Install React VII Facility, B9001, Post V19, from the Department of the Air Force. Due Nov 2, 2026, 2:00 PM (UTC-6).
File name: 23 31 13.00 40.pdf
The full file is for paid members, or buy this bid alone.
Preview
Tinker AFB, OK
TAFB Technical Specifications 2019
SECTION 23 31 13.00 40
METAL DUCTS
PART 1
GENERAL
Section 23 00 00 AIR SUPPLY, DISTRIBUTION, VENTILATION, AND EXHAUST
SYSTEMS apply to work specified in this section.
Section 23 05 48.00 40 VIBRATION AND SEISMIC CONTROLS FOR HVAC PIPING AND
EQUIPMENT applies to work in this section.
Section 40 17 30.00 40 WELDING GENERAL PIPING applies to work specified in this section.
1.1
REFERENCES
The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.
AMERICAN INSTITUTE OF STEEL CONSTRUCTION (AISC)
AISC 325
(2011) Steel Construction Manual
AISC 360
(2010) Specification for Structural Steel
Buildings
AMERICAN SOCIETY OF HEATING, REFRIGERATING AND AIR-CONDITIONING
ENGINEERS (ASHRAE)
ASHRAE EQUIP IP HDBK
(2012) Handbook, HVAC Systems and
Equipment (IP Edition)
ASHRAE EQUIP SI HDBK
(2012) Handbook, HVAC Systems and
Equipment (SI Edition)
ASHRAE FUN IP
(2013; Addenda and Corrigendum 2013)
Fundamentals Handbook, I-P Edition
ASHRAE FUN SI
(2013; Addenda and Corrigendum 2013)
Fundamentals Handbook, SI Edition
AMERICAN WELDING SOCIETY (AWS)
AWS A5.8/A5.8M
(2011; Amendment 2012) Specification for
Filler Metals for Brazing and Braze Welding
ASTM INTERNATIONAL (ASTM)
ASTM A123/A123M
(2013) Standard Specification for Zinc
(Hot-Dip Galvanized) Coatings on Iron and
Steel Products
ASTM A36/A36M
(2014) Standard Specification for Carbon
Structural Steel
April 2019
SECTION 23 31 13.00 40
Tinker AFB, OK
TAFB Technical Specifications 2019
ASTM A653/A653M
(2015; E 2016) Standard Specification for
Steel Sheet, Zinc-Coated (Galvanized) or
Zinc-Iron Alloy-Coated (Galvannealed) by
the Hot-Dip Process
ASTM A924/A924M
(2016a) Standard Specification for General
Requirements for Steel Sheet,
Metallic-Coated by the Hot-Dip Process
ASTM C1071
(2016) Standard Specification for Fibrous
Glass Duct Lining Insulation (Thermal and
Sound Absorbing Material)
ASTM D257
(2014) Standard Test Methods for D-C
Resistance or Conductance of Insulating
Materials
ASTM E90
(2009) Standard Test Method for Laboratory
Measurement of Airborne Sound Transmission
Loss of Building Partitions and Elements
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 90A
(2015) Standard for the Installation of
Air Conditioning and Ventilating Systems
SHEET METAL AND AIR CONDITIONING CONTRACTORS' NATIONAL ASSOCIATION
(SMACNA)
SMACNA 1966
(2005) HVAC Duct Construction Standards
The beginning of the document. Download the full file to read on.