Bid document
Updated
A PDF document (42 KB) attached to WWYK250063 - Install React VII Facility, B9001, Post V19, from the Department of the Air Force. Due Nov 2, 2026, 2:00 PM (UTC-6).
File name: 10 14 00.10.pdf
The full file is for paid members, or buy this bid alone.
Preview
Tinker AFB, OK
TAFB Technical Sprcifications 2019
SECTION 10 14 00.10
EXTERIOR SIGNAGE
PART 1
1.1
GENERAL
REFERENCES
The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.
ALUMINUM ASSOCIATION (AA)
AA DAF45
(2003; Reaffirmed 2009) Designation System
for Aluminum Finishes
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI Z97.1
(2015) Safety Glazing Materials Used in
Buildings - Safety Performance
Specifications and Methods of Test
AMERICAN WELDING SOCIETY (AWS)
AWS C1.1M/C1.1
(2012) Recommended Practices for
Resistance Welding
AWS D1.1/D1.1M
(2015; Errata 1 2015; Errata 2 2016)
Structural Welding Code - Steel
AWS D1.2/D1.2M
(2014) Structural Welding Code - Aluminum
ASTM INTERNATIONAL (ASTM)
ASTM A1011/A1011M
(2015) Standard Specification for Steel,
Sheet, and Strip, Hot-Rolled, Carbon,
Structural, High-Strength Low-Alloy and
High-Strength Low-Alloy with Improved
Formability and Ultra-High Strength
ASTM A123/A123M
(2013) Standard Specification for Zinc
(Hot-Dip Galvanized) Coatings on Iron and
Steel Products
ASTM A36/A36M
(2014) Standard Specification for Carbon
Structural Steel
ASTM A653/A653M
(2015; E 2016) Standard Specification for
Steel Sheet, Zinc-Coated (Galvanized) or
Zinc-Iron Alloy-Coated (Galvannealed) by
the Hot-Dip Process
ASTM A924/A924M
(2016a) Standard Specification for General
Requirements for Steel Sheet,
Metallic-Coated by the Hot-Dip Process
April 2019
SECTION 10 14 00.10
Tinker AFB, OK
TAFB Technical Sprcifications 2019
ASTM B108/B108M
(2015) Standard Specification for
Aluminum-Alloy Permanent Mold Castings
ASTM B209
(2014) Standard Specification for Aluminum
and Aluminum-Alloy Sheet and Plate
ASTM B209M
(2014) Standard Specification for Aluminum
and Aluminum-Alloy Sheet and Plate (Metric)
ASTM B221
(2014) Standard Specification for Aluminum
and Aluminum-Alloy Extruded Bars, Rods,
Wire, Profiles, and Tubes
ASTM B221M
(2013) Standard Specification for Aluminum
and Aluminum-Alloy Extruded Bars, Rods,
Wire, Profiles, and Tubes (Metric)
ASTM B26/B26M
(2014; E 2015) Standard Specification for
Aluminum-Alloy Sand Castings
ASTM B62
(2015) Standard Specification for
Composition Bronze or Ounce Metal Castings
ASTM C1036
(2016) Standard Specification for Flat
Glass
ASTM D3841
(2016) Standard Specification for Glass
Fiber-Reinforced Polyester Plastic Panels
ASTM E84
(2016) Standard Test Method for Surface
Burning Characteristics of Building
The beginning of the document. Download the full file to read on.