ENERGY QAP C16.09 TURBINE FUEL AVIATION (Jet A1)

signed by
MACLANE.SKYLLAR. Digitally

MACLANE.SKYLLAR.BRYANNA.1252141827

BRYANNA.1252141827 Date: 2025.01.16 14:18:25 -05'00'

CATLIN.JOSHUA.D.127 Digitally signed by

CATLIN.JOSHUA.D.1276289540

6289540
Date: 2025.01.23 09:31:39 -05'00'

BANISZEWSKI.DANIE

L.J.1287388698

Digitally signed by

BANISZEWSKI.DANIEL.J.1287388698

Date: 2025.01.23 14:08:16 -07'00'

C16.09

TURBINE FUEL, AVIATION (JET Al) (DLA ENERGY JAN 2025)

NATIONAL STOCK NUMBER

PRODUCT NOMENCLATURE

PRODUCT CODE

9130-00-753-5026

Turbine Fuel, Aviation, Jet A1

JAl

Supplies delivered under this contract shall conform to all Federal, State, and local environmental requirements applicable to the geographic location of the receiving activity on the date of delivery. This includes delivery of fuel and documentation in a manner consistent with any existing or after-imposed Title V (Clean Air Act) Permits. The list of such requirements contained in this contract is not intended to be a complete list, and the Contractor shall be responsible for determining the existence of all such requirements. Selected regional environmental requirements are highlighted in the SPECIFICATIONS (CONT'D) clause. In the event that a Federal, State, or local environmental requirement is more stringent than a fuel specification contained in this contract, the Contractor shall deliver product that complies with the more stringent fuel specification. Product that fails to meet the more stringent fuel specification will be considered to be a nonconforming supply. Product(s) to be supplied shall fully meet the requirements of the applicable specification(s) as cited above. In the event that compliance with the more stringent fuel specification causes the contractor to incur additional costs, the contractor may request an equitable adjustment.
(a)
PRODUCT REQUIREMENTS. Product shall conform to the latest version of ASTM Dl655: Standard Specification for Aviation Turbine Fuels with the following modifications. For European, Middle Eastern, and Asian Locations Only: product shall conform to the latest revision of Defence Standard 91-091. (b)

SPECIFICATION MODIFICATIONS.
(1) Microseparometer (MSEP).

(i) The following MSEP ratings apply in the presence of the additives listed below. Values apply at point of manufacture:
Jet A1 Additive
Fuel System Icing Inhibitor (FSII)
Corrosion Inhibitor/Lubricity Improver (CI/LI)
Fuel System Icing Inhibitor (FSII) and
Corrosion Inhibitor/Lubricity Improver (CI/LI)

MSEP Rating, min.