Fort Bliss Gravesite Expansion BD Part 7

DEMOLITION PLAN SYMBOLS

DEMOLITION GENERAL NOTES

DP2
2101AD201

DP12

1. CONTRACTOR MUST COORDINATE ALL DEMOLITION WORK, PHASING AND SEQUENCING WITH THE

OWNER. ANY INFORMATION REGARDING SEQUENCING PROVIDED IN THESE DOCUMENTS IS FOR

ARCHITECT - OWNER PLANNING PURPOSES ONLY, UNLESS NOTED OTHERWISE.

DP12

2. CONTRACTOR MUST BE RESPONSIBLE FOR COORDINATING WITH ALL TRADES FOR THE

DEMOLITION WORK REQUIRED FOR THIS PROJECT.

A

3. WHERE PARTITIONS ARE INDICATED TO BE REMOVED, REMOVE PARTITION ALONG WITH ALL

ITEMS CONTAINED WITHIN, INCLUDING DOORS, FRAMES, HARDWARE, SIDELIGHTS, WINDOWS,

MECHANICAL AND ELECTRICAL EQUIPMENT, ETC. TO STRUCTURE ABOVE, UNLESS NOTED

OTHERWISE.

EXISTING

UNISEX

TOILET

EXISTING

ADMIN

OFFICER

EXISTING

ADMIN

STAFF

DP12

EXISTING

CORRIDOR

DP2

B

EXISTING

STORAGE

WALL OR

PARTITION TO BE

REMOVED

EXISTING DOOR

AND FRAME TO BE

DEMOLISHED

DE10

A

KEY NOTE

REMOVE ALL

STUCCO FROM WALL

AND ENTRANCE

CANOPY IN IT'S

ENTIRETY.

GRIDLINE

AREA OF DEMO

NIC

NOTE: NOT ALL SYMBOLS MAY BE USED ON EACH PLAN

6. WHERE INDICATED, REMOVE ALL WALL/PARTITION EXISTING FINISHES AND PREPARE THE

SURFACES FOR SCHEDULED FINISHES, SEE FINISH SCHEDULE FOR FINISHES.

DP2

7. ALL DISTURBED AREAS, WALLS, PARTITIONS, FLOORS, ETC, DAMAGED BY DEMOLITION WORK MUST BE PATCHED TO MATCH ADJACENT AREA.
DP12

EXISTING

DIRECTOR

A

5. WHERE CEILING IS INDICATED TO BE DEMOLISHED, REMOVE CEILING SUSPENSION SYSTEM

ALONG WITH ALL ASSOCIATED MECHANICAL AND ELECTRICAL ITEMS, UNLESS NOTED OTHERWISE. SEE MECHANICAL AND ELECTRICAL DRAWINGS FOR EXTENT OF CONDUIT, PIPING AND DUCTWORK DEMOLITION WITHIN AREA TO BE REMODELED. CUT CEILING GRID AND CEILING TILES ONLY TO ALLOW FOR THE CONSTRUCTION OF THE TE ROOM WALLS. WHERE CEILING IS INDICATED TO BE

DEMOLISHED, MODIFY CEILING GRID AND CUT CEILING TILES AS NECESSARY TO ENSURE

ORIGINAL FINISHED CEILING LAYOUT IS MAINTAINED. REINSTALL WALL MOLDING IN ALIGNMENT WITH EXISTING WALL MOLDING, MITER CUT OUTSIDE CORNER, AND PROVIDE STABILIZER CLIPS AS

NECESSARY. REPLACE ALL CEILING TILES DAMAGED OR SOILED DURING THE COURSE OF

CONSTRUCTION WITH NEW TILES TO MATCH EXISTING.

DP12

EXISTING DOOR

AND FRAME TO

REMAIN

DASHED LINE

INDICATES ITEM TO

BE REMOVED (UNO)

4. WHERE FLOOR FINISH IS INDICATED TO BE DEMOLISHED, REMOVE FINISH TO FLOOR SLAB AS

REQUIRED AND PREPARE SLAB SURFACE FOR SCHEDULED FINISHES WITHIN AREA TO BE

REMODELED, UNLESS NOTED OTHERWISE. REMOVE CARPET TILE UP TO THE FACE OF THE NEW TE

ROOM WALLS. PROTECT CARPET FOR REINSTALLATION AS NECESSARY. SEE FINISH SCHEDULE

FOR EXISTING FLOOR FINISHES TO REMAIN UNDISTURBED.

EXISTING

PROGRAM

SPECIALIST