LUXURY VINYL TILE

Spacia® Collection | Wood
Style

Wood

Construction

Luxury Vinyl Tile
Luxury Vinyl Tile
Non-ortho Phthalate
Non-ortho Phthalate
ASTM F1700 Class III, Type B
ASTM F1700 Class III, Type B
0.098” (2.5 mm)
0.1575” (4.0 mm)

20 mil (0.51 mm)

20 mil (0.51 mm)

Quantum Guard Elite®
Quantum Guard Elite®
Micro-bevel
Micro-bevel
6” x 36” (152.5 x 305 mm),
6” x 36” (152.5 x 457 mm),
7.25” x 48” (184 x 1219 mm)
7.25” x 48” (184 x 1219 mm)
Sizes are style dependent; refer to Product
Sizes are style dependent; refer to Product
Availability Chart
Availability Chart
6” x 36” - 30 pcs, 45 ft (4.18 m ), 33.53 lbs (15.21 kg) 6” x 36” - 12 pcs, 18 ft2 (1.67 m2), 23.76 lbs (10.78 kg) 7.25” x 48” - 18 pcs, 43.5 ft2 (4.04 m2), 32.41 lbs (14.70 kg) 7.25” x 48” - 12 pcs, 29 ft2 (2.694 m2), 38.28 lbs (17.36 kg) Packaging may differ for QuickStix®
Packaging may differ for QuickStix®
Porous & Non-porous Substrates:
V-88 / Amtico PSA Full Spread, Transitional Pressure Sensitive MoistureLoc / Amtico RP-18 Full Spread, One Component
V-95 Full Spread, 2-Part Epoxy
XpressStep for LVT & Sheet Vinyl Full Coverage Spray

Classification
Total Thickness
Wear Layer Thickness
Wear Layer
Edge Treatment
Sizes

Colors
Packaging

Adhesive

4mm Wood

Note: Must use V-95, MoistureLoc, Amtico RP-18, QuickStix or XpressStep adhesive under hospital beds and heavy rolling load areas. In more abusive conditions such as areas subject to dragging force, direct sunlight or where topical moisture would be a concern, only V-95, MoistureLoc, Amtico RP-18 or QuickStix should be used.

QuickStix® Available with QuickStix® pre-applied adhesive, reducing time and labor required to install the flooring. QuickStix® floors can be used immediately after installation, even in extreme moisture areas. Installation Method All arrows in the same direction. Planks should have end joints offset by at least 6” and staggered to create a random appearance. Tiles should be installed block or staggered; when quarter turned, arrows should alternate.
Testing

HUD/FHA

Flexibility (ASTM F137)
Dimensional Stability (ASTM F2199)
Squareness (ASTM F2055)
Static Load (ASTM F970 mod.)
Residual Indentation (ASTM F1914)
Flooring Radiant Panel (ASTM E648)
Smoke Density (ASTM E662)
Slip Resistance (ASTM C1028)
Resistance to Light (ASTM F1515)
Chemical Resistance (ASTM F925)
Resistance to Heat (ASTM F1514)

Passes
Passes - 1” Mandrel - No Crack/Break