MILLWORK WALL FINISHING SYSTEMS

PER SPEC 09 06 00

FINISH CODE: RB-1

DESCRIPTION: PROFILE RUBBER BASE

Section 09.65.13

MANUFACTURER: TARKETT

RESILIENT WALL BASE

MANUFACTURER NO.: MW-32-F6

THIS DOCUMENT IS INTENDED AS A SUGGESTED GUIDE FOR CREATING, MODIFYING, OR EDITING YOUR 3PART ARCHITECTURAL GUIDE SPECIFICATIONS. TARKETT WILL NOT BE LIABLE FOR ANY DAMAGES ARISING OUT OF THE USE OF ANY INFORMATION OR SPECIFICATIONS FOUND IN THIS DOCUMENT.
ENSURE THAT YOU HAVE THE LATEST PUBLICATION FOR THIS SPECIFICATION. THE SPECIFIER OR DESIGNER IS RESPONSIBLE FOR PRODUCT SELECTION AND ACCURACY OF ALL PROJECT SPECIFICATIONS, INCLUDING ANY TARKETT INFORMATION OR SPECIFICATIONS USED.

PART 1 - GENERAL

1.1

RELATED DOCUMENTS

A.

1.2

Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.

SUMMARY

A.

1.3

Section Includes:
1.
Resilient Wall Base.

SUBMITTALS

A.

Product Data: For each type of product indicated.

B.

LEED Submittals:
1.

Product Data for Credit EQ 4.1: For adhesives, include printed statement of VOC content and chemical components.

C.

Samples for Initial Selection: For each type of product indicated.

D.

Samples for Verification: For each type of product indicated, in manufacturer's standard-size samples of each resilient product color, texture, and pattern required.

E.

Product Schedule: For resilient products. Use same designations indicated on Drawings.

1.4

QUALITY ASSURANCE

A.

010226

Installation Qualification: Contractors for floor covering installation should be experienced in managing commercial flooring projects and provide professional installers, qualified to install the

Section 09.65.13

RESILIENT WALL BASE

various flooring materials specified. An installer is “qualified” if trained, or a certified by Tarkett or a certified INSTALL (International Standards & Training Alliance) resilient floor covering installer.
B.
1.5

Mockups: Provide resilient products with mockups specified in other Sections.

DELIVERY, STORAGE, AND HANDLING

A.

1.6

Store resilient products and installation materials in dry spaces protected from the weather, with ambient temperatures maintained within range recommended by Tarkett, but not less than 55 deg F (13 deg C) or more than 85 deg F (29 deg C).

PROJECT CONDITI ONS

A.

Install resilient products after other finishing operations, including painting, have been completed.

B.

Maintain ambient temperatures within range recommended by Tarkett, but not less than 65 deg F (18 deg C) or more than 85 deg F (29 deg C) in spaces to receive resilient products during the