Bid document
Updated
A PDF document (151 KB) attached to WWYK250063 - Install React VII Facility, B9001, Post V19, from the Department of the Air Force. Due Nov 2, 2026, 2:00 PM (UTC-6).
File name: 23 05 15.pdf
The full file is for paid members, or buy this bid alone.
Preview
Tinker AFB, OK
TAFB Technical Sprcifications 2019
SECTION 23 05 15
COMMON PIPING FOR HVAC
PART 1
1.1
GENERAL
REFERENCES
The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.
AMERICAN INSTITUTE OF STEEL CONSTRUCTION (AISC)
AISC 325
(2011) Steel Construction Manual
AMERICAN WELDING SOCIETY (AWS)
AWS A5.8/A5.8M
(2011; Amendment 2012) Specification for
Filler Metals for Brazing and Braze Welding
AWS WHB-2.9
(2004) Welding Handbook; Volume 2, Welding
Processes, Part 1
ASME INTERNATIONAL (ASME)
ASME A112.18.1/CSA B125.1
(2012) Plumbing Supply Fittings
ASME A112.19.2/CSA B45.1
(2013) Standard for Vitreous China
Plumbing Fixtures and Hydraulic
Requirements for Water Closets and Urinals
ASME B1.20.7
(1991; R 2013) Standard for Hose Coupling
Screw Threads (Inch)
ASME B1.21M
(1997; R 2013) Standard for Metric Screw
Threads - MJ Profile
ASME B16.1
(2015) Gray Iron Pipe Flanges and Flanged
Fittings Classes 25, 125, and 250
ASME B16.11
(2011) Forged Fittings, Socket-Welding and
Threaded
ASME B16.22
(2013) Standard for Wrought Copper and
Copper Alloy Solder Joint Pressure Fittings
ASME B16.25
(2012) Standard for Buttwelding Ends
ASME B16.26
(2013) Standard for Cast Copper Alloy
Fittings for Flared Copper Tubes
ASME B16.3
(2011) Malleable Iron Threaded Fittings,
Classes 150 and 300
ASME B16.39
(2014) Standard for Malleable Iron
Threaded Pipe Unions; Classes 150, 250,
April 2019
SECTION 23 05 15
Tinker AFB, OK
TAFB Technical Sprcifications 2019
and 300
ASME B16.4
(2011) Standard for Gray Iron Threaded
Fittings; Classes 125 and 250
ASME B16.5
(2013) Pipe Flanges and Flanged Fittings:
NPS 1/2 Through NPS 24 Metric/Inch Standard
ASME B16.9
(2012) Standard for Factory-Made Wrought
Steel Buttwelding Fittings
ASME B31.3
(2014) Process Piping
ASME B36.10M
(2015) Standard for Welded and Seamless
Wrought Steel Pipe
ASME B40.100
(2013) Pressure Gauges and Gauge
Attachments
ASME BPVC SEC IX
(2010) BPVC Section IX-Welding and Brazing
Qualifications
ASME BPVC SEC VIII D1
(2010) BPVC Section VIII-Rules for
Construction of Pressure Vessels Division 1
ASTM INTERNATIONAL (ASTM)
ASTM A105/A105M
(2014) Standard Specification for Carbon
Steel Forgings for Piping Applications
ASTM A106/A106M
(2014) Standard Specification for Seamless
Carbon Steel Pipe for High-Temperature
Service
ASTM A126
(2004; R 2014) Standard Specification for
Gray Iron Castings for Valves, Flanges,
and Pipe Fittings
The beginning of the document. Download the full file to read on.