Bid document

AFRL, RENOVATE H8 LABORATORY, B3

ULDF200308AE

SECTION 05 40 00

COLD-FORMED METAL FRAMING

05/15, CHG 1: 08/18

PART 1

1.1

GENERAL

REFERENCES

The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.

AMERICAN CONCRETE INSTITUTE (ACI)

ACI 318

(2019; R 2022) Building Code Requirements
for Structural Concrete (ACI 318-19) and
Commentary (ACI 318R-19)

AMERICAN IRON AND STEEL INSTITUTE (AISI)

AISI S100

(2012) North American Specification for
the Design of Cold-Formed Steel Structural
Members

AISI S110

(2007; Suppl 1; Reaffirmed 2012) Standard
for Seismic Design of Cold-Formed Steel
Structural Systems - Special Bolted Moment
Frames

AISI S200

(2007) North American Standard for
Cold-Formed Steel Framing - General
Provision

AISI S201

(2007) North American Standard for
Cold-Formed Steel Framing - Product Data

AISI S202

(2011) Code of Standard Practice for
Cold-formed Steel Structural Framing

AISI S211

(2007) North American Standard for
Cold-Formed Steel Framing - Wall Stud
Design

AISI S212

(2007) North American Standard for
Cold-Formed Steel Framing - Header Design

AISI S213

(2007; Suppl 1 2009) North American
Standard for Cold-Formed Steel Framing Lateral Design

AISI S214

(2012) North American Standard for
Cold-Formed Steel Framing – Truss Design

AMERICAN WELDING SOCIETY (AWS)

AWS D1.1/D1.1M

(2020; Errata 1 2021) Structural Welding
Code - Steel

SECTION 05 40 00

AFRL, RENOVATE H8 LABORATORY, B3

AWS D1.3/D1.3M

ULDF200308AE

(2018) Structural Welding Code - Sheet
Steel

ASTM INTERNATIONAL (ASTM)

ASTM A123/A123M

(2024) Standard Specification for Zinc
(Hot-Dip Galvanized) Coatings on Iron and
Steel Products

ASTM A153/A153M

(2023) Standard Specification for Zinc
Coating (Hot-Dip) on Iron and Steel
Hardware

ASTM A307

(2021) Standard Specification for Carbon
Steel Bolts, Studs, and Threaded Rod 60
000 PSI Tensile Strength

ASTM A370

(2024) Standard Test Methods and
Definitions for Mechanical Testing of
Steel Products

ASTM A653/A653M

(2023) Standard Specification for Steel
Sheet, Zinc-Coated (Galvanized) or
Zinc-Iron Alloy-Coated (Galvannealed) by
the Hot-Dip Process

ASTM A1003/A1003M

(2023; E 2024) Standard Specification for
Steel Sheet, Carbon, Metallic- and
Nonmetallic-Coated for Cold-Formed Framing
Members

ASTM C955

(2024) Standard Specification for
Cold-Formed Steel Structural Framing
Members

ASTM C1007

(2020) Standard Specification for