Bid document
Updated
A PDF document (26 KB) attached to WWYK250063 - Install React VII Facility, B9001, Post V19, from the Department of the Air Force. Due Nov 2, 2026, 2:00 PM (UTC-6).
File name: 07 21 16.pdf
The full file is for paid members, or buy this bid alone.
Preview
Tinker AFB, OK
TAFB Technical Sprcifications 2019
SECTION 07 21 16
MINERAL FIBER BLANKET INSULATION
PART 1
1.1
GENERAL
REFERENCES
The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.
ASTM INTERNATIONAL (ASTM)
ASTM C665
(2017) Standard Specification for
Mineral-Fiber Blanket Thermal Insulation
for Light Frame Construction and
Manufactured Housing
ASTM C930
(2018) Standard Classification of
Potential Health and Safety Concerns
Associated with Thermal Insulation
Materials and Accessories
ASTM D3575
(2014) Flexible Cellular Materials Made
From Olefin Polymers
ASTM D3833/D3833M
(1996; R 2011) Water Vapor Transmission of
Pressure-Sensitive Tapes
ASTM D4397
(2016) Standard Specification for
Polyethylene Sheeting for Construction,
Industrial, and Agricultural Applications
ASTM D5359
(2015) Standard Specification for Glass
Cullet Recovered from Waste for Use in
Manufacture of Glass Fiber
ASTM E136
(2016) Behavior of Materials in a Vertical
Tube Furnace at 750 Degrees C
ASTM E84
(2018) Standard Test Method for Surface
Burning Characteristics of Building
Materials
ASTM E96/E96M
(2016) Standard Test Methods for Water
Vapor Transmission of Materials
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 211
(2016) Standard for Chimneys, Fireplaces,
Vents, and Solid Fuel-Burning Appliances
NFPA 31
(2016) Standard for the Installation of
Oil-Burning Equipment
NFPA 54
(2018) National Fuel Gas Code
April 2019
SECTION 07 21 16
Tinker AFB, OK
NFPA 70
TAFB Technical Sprcifications 2019
(2017; ERTA 1-2 2017; TIA 17-1; TIA 17-2;
TIA 17-3; TIA 17-4; TIA 17-5; TIA 17-6;
TIA 17-7; TIA 17-8; TIA 17-9; TIA 17-10;
TIA 17-11; TIA 17-12; TIA 17-13; TIA
17-14) National Electrical Code
TECHNICAL ASSOCIATION OF THE PULP AND PAPER INDUSTRY (TAPPI)
TAPPI T803 OM
(2010) Puncture Test of Container Board
U.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)
29 CFR 1910.134
Respiratory Protection
UL ENVIRONMENT (ULE)
ULE Greenguard
1.2
UL Greenguard Certification Program
SUBMITTALS
Government approval is required for submittals with a "G" designation; submittals not having a "G" designation are for Contractor Quality Control approval. Submit the following in accordance with Section 01 33 00
SUBMITTAL PROCEDURES:
SD-03 Product Data
Blanket Insulation
Sill Sealer Insulation
Vapor Retarder
Pressure Sensitive Tape
Accessories
SD-08 Manufacturer's Instructions
The beginning of the document. Download the full file to read on.