Bid document

**************************************************************************

USACE / NAVFAC / AFCEC

Preparing Activity:

USACE

UFGS-03 01 00 (February 2018)
-----------------------------------Superseding
UFGS-03 01 30.71 (April 2006)
UFGS-03 01 30 (November 2009)
UFGS-03 01 32 (November 2009)

UNIFIED FACILITIES GUIDE SPECIFICATIONS

References are in agreement with UMRL dated July 2025
**************************************************************************

SECTION TABLE OF CONTENTS

DIVISION 03 - CONCRETE

SECTION 03 01 00

REHABILITATION OF CONCRETE

PART 1

GENERAL

1.1

SCOPE

1.2

DEFINITIONS

1.2.1
Bracing
1.2.2
Delamination
1.2.3
Rehabilitation
1.2.4
Repair
1.2.5
Shoring
1.2.6
Termination Joint
1.2.7
Unsound Concrete
1.3

REFERENCES

1.4

SUBMITTALS

1.5

QUALITY ASSURANCE

1.5.1
General Requirements
1.5.2
Quality Control Plan
1.5.3
Qualifications
1.5.3.1
Testing Agencies
1.5.3.2
Quality Control Personnel
1.5.3.3
Contractor Qualifications
1.5.3.4
Worker Qualifications
1.5.3.5
Regulatory Requirements
1.5.4
Pre-Construction Conference
1.5.5
Work Plan
1.6

ACCEPTANCE OF REHABILITATION WORK

1.6.1
General Requirements
1.6.2
Tolerances
1.6.3
Appearance
1.7

PROTECTION OF COMPLETED REHABILITATION WORK

PART 2

2.1

PRODUCTS

MATERIALS FOR SHORING AND BRACING

SECTION 03 01 00

2.1.1
Shoring and Bracing Systems
2.1.2
Design Requirements
2.2

EQUIPMENT FOR CONCRETE PREPARATION

2.2.1
Equipment for Concrete Removal
2.2.1.1
Cutting Equipment
2.2.1.2
Concrete Breakers
2.2.1.3
Hydromilling Equipment
2.2.2
Surface preparation and cleaning equipment
2.2.2.1
Abrasive Blasting
2.2.2.2
Low Pressure Water Cleaning
2.2.2.3
Other Cleaning Equipment
2.3

MATERIALS FOR FORMWORK AND EMBEDDED ITEMS

2.4

REINFORCEMENT AND REINFORCEMENT SUPPORTS

2.4.1
Steel Bars, Wires, and Fiber-reinforced Concrete
2.4.2
Fiber-Reinforced Polymers
2.5

CONVENTIONAL CONCRETE

2.6

POLYMERS

2.6.1
Epoxies
2.6.2
Latexes
2.6.3
Methacrylates
2.6.4
Other Polymers
2.6.5
Aggregate
2.7

MISCELLANEOUS MATERIALS AND EQUIPMENT

2.7.1
Packaged and proprietary materials
2.7.2
Bond Breakers
2.7.3
Structural steel
2.7.4
Concrete Accessories
2.7.5
Miscellaneous Equipment
2.8

MIXTURE PROPORTIONING

PART 3

EXECUTION

3.1

GENERAL REQUIREMENTS

3.1.1
Examination
3.1.2
Protection
3.1.3
Formwork and Shoring
3.1.3.1
Formwork