Bid document
Updated
A PDF document (39 KB) attached to WWYK250063 - Install React VII Facility, B9001, Post V19, from the Department of the Air Force. Due Nov 2, 2026, 2:00 PM (UTC-6).
File name: 08 11 13.pdf
The full file is for paid members, or buy this bid alone.
Preview
Tinker AFB, OK
TAFB Technical Sprcifications 2019
SECTION 08 11 13
STEEL DOORS AND FRAMES
PART 1
1.1
GENERAL
REFERENCES
The publications listed below form a part of this specification to the extent referenced. The publications are referred to in the text by the basic designation only.
AMERICAN WELDING SOCIETY (AWS)
AWS D1.1/D1.1M
(2015; Errata 1 2015; Errata 2 2016)
Structural Welding Code - Steel
ASTM INTERNATIONAL (ASTM)
ASTM A653/A653M
(2015; E 2016) Standard Specification for
Steel Sheet, Zinc-Coated (Galvanized) or
Zinc-Iron Alloy-Coated (Galvannealed) by
the Hot-Dip Process
ASTM A879/A879M
(2012) Standard Specification for Steel
Sheet, zinc Coated by the Electrolytic
Process for Applications Requiring
Designation of the Coating Mass on Each
Surface
ASTM A924/A924M
(2016a) Standard Specification for General
Requirements for Steel Sheet,
Metallic-Coated by the Hot-Dip Process
ASTM C578
(2016) Standard Specification for Rigid,
Cellular Polystyrene Thermal Insulation
ASTM C591
(2016) Standard Specification for Unfaced
Preformed Rigid Cellular Polyisocyanurate
Thermal Insulation
ASTM C612
(2014) Mineral Fiber Block and Board
Thermal Insulation
ASTM D2863
(2013) Measuring the Minimum Oxygen
Concentration to Support Candle-Like
Combustion of Plastics (Oxygen Index)
ASTM E1300
(2016) Standard Practice for Determining
Load Resistance of Glass in Buildings
ASTM E283
(2004; R 2012) Determining the Rate of Air
Leakage Through Exterior Windows, Curtain
Walls, and Doors Under Specified Pressure
Differences Across the Specimen
ASTM F2248
(2012) Standard Practice for Specifying an
April 2019
SECTION 08 11 13
Tinker AFB, OK
TAFB Technical Sprcifications 2019
Equivalent 3-Second Duration Design
Loading for Blast Resistant Glazing
Fabricated with Laminated Glass
BUILDERS HARDWARE MANUFACTURERS ASSOCIATION (BHMA)
ANSI/BHMA A156.115
(2016) Hardware Preparation in Steel Doors
and Steel Frames
NATIONAL ASSOCIATION OF ARCHITECTURAL METAL MANUFACTURERS (NAAMM)
NAAMM HMMA HMM
(1999; R2000) Hollow Metal Manual
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 105
(2016) Standard for Installation of Smoke
Door Assemblies and Other Opening
Protectives
NFPA 252
(2017) Standard Methods of Fire Tests of
Door Assemblies
NFPA 80
(2016) Standard for Fire Doors and Other
Opening Protectives
STEEL DOOR INSTITUTE (SDI/DOOR)
SDI/DOOR 111
(2009) Recommended Selection and Usage
Guide for Standard Steel Doors, Frames and
Accessories
SDI/DOOR 113
(2001; R2006) Standard Practice for
The beginning of the document. Download the full file to read on.