Bid document
Updated
A PDF document (47 KB) attached to WWYK250063 - Install React VII Facility, B9001, Post V19, from the Department of the Air Force. Due Nov 2, 2026, 2:00 PM (UTC-6).
File name: 08 33 23.pdf
The full file is for paid members, or buy this bid alone.
Preview
Tinker AFB, OK
TAFB Technical Sprcifications 2019
SECTION 08 33 23
OVERHEAD COILING DOORS
PART 1
1.1
GENERAL
REFERENCES
The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.
AMERICAN SOCIETY OF CIVIL ENGINEERS (ASCE)
ASCE 7
(2010; Errata 2011; Supp 1 2013) Minimum
Design Loads for Buildings and Other
Structures
AMERICAN SOCIETY OF HEATING, REFRIGERATING AND AIR-CONDITIONING
ENGINEERS (ASHRAE)
ASHRAE FUN IP
(2013; Addenda and Corrigendum 2013)
Fundamentals Handbook, I-P Edition
ASME INTERNATIONAL (ASME)
ASME B29.400
(2001; R 2013) Combination, "H" Type Mill
Chains, and Sprockets
ASTM INTERNATIONAL (ASTM)
ASTM A153/A153M
(2016) Standard Specification for Zinc
Coating (Hot-Dip) on Iron and Steel
Hardware
ASTM A27/A27M
(2013) Standard Specification for Steel
Castings, Carbon, for General Application
ASTM A307
(2014) Standard Specification for Carbon
Steel Bolts and Studs, 60 000 PSI Tensile
Strength
ASTM A36/A36M
(2014) Standard Specification for Carbon
Structural Steel
ASTM A48/A48M
(2003; R 2012) Standard Specification for
Gray Iron Castings
ASTM A53/A53M
(2012) Standard Specification for Pipe,
Steel, Black and Hot-Dipped, Zinc-Coated,
Welded and Seamless
ASTM A653/A653M
(2015) Standard Specification for Steel
Sheet, Zinc-Coated (Galvanized) or
Zinc-Iron Alloy-Coated (Galvannealed) by
the Hot-Dip Process
April 2019
SECTION 08 33 23
Tinker AFB, OK
TAFB Technical Sprcifications 2019
ASTM A666
(2015) Standard Specification for Annealed
or Cold-Worked Austenitic Stainless Steel
Sheet, Strip, Plate and Flat Bar
ASTM A780/A780M
(2009; R 2015) Standard Practice for
Repair of Damaged and Uncoated Areas of
Hot-Dip Galvanized Coatings
ASTM A924/A924M
(2014) Standard Specification for General
Requirements for Steel Sheet,
Metallic-Coated by the Hot-Dip Process
ASTM B221
(2014) Standard Specification for Aluminum
and Aluminum-Alloy Extruded Bars, Rods,
Wire, Profiles, and Tubes
ASTM B221M
(2013) Standard Specification for Aluminum
and Aluminum-Alloy Extruded Bars, Rods,
Wire, Profiles, and Tubes (Metric)
ASTM D2000
(2012) Standard Classification System for
Rubber Products in Automotive Applications
ASTM E330/E330M
(2014) Structural Performance of Exterior
Windows, Doors, Skylights and Curtain
Walls by Uniform Static Air Pressure
Difference
ASTM E84
(2015b) Standard Test Method for Surface
Burning Characteristics of Building
The beginning of the document. Download the full file to read on.