Bid document
Updated
A PDF document (43 KB) attached to WWYK250063 - Install React VII Facility, B9001, Post V19, from the Department of the Air Force. Due Nov 2, 2026, 2:00 PM (UTC-6).
File name: 07 92 00.pdf
The full file is for paid members, or buy this bid alone.
Preview
Tinker AFB, OK
TAFB Technical Sprcifications 2019
SECTION 07 92 00
JOINT SEALANTS
PART 1
1.1
GENERAL
REFERENCES
The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.
ASTM INTERNATIONAL (ASTM)
ASTM C1193
(2013) Standard Guide for Use of Joint
Sealants
ASTM C1311
(2014) Standard Specification for Solvent
Release Agents
ASTM C1521
(2013) Standard Practice for Evaluating
Adhesion of Installed Weatherproofing
Sealant Joints
ASTM C509
(2006; R 2015) Elastomeric Cellular
Preformed Gasket and Sealing Material
ASTM C734
(2015) Low-Temperature Flexibility of
Latex Sealants After Artificial Weathering
ASTM C919
(2012) Use of Sealants in Acoustical
Applications
ASTM C920
(2014a) Standard Specification for
Elastomeric Joint Sealants
ASTM D1056
(2014) Standard Specification for Flexible
Cellular Materials - Sponge or Expanded
Rubber
ASTM D217
(2010) Cone Penetration of Lubricating
Grease
ASTM D2452
(2015) Standard Test Method for
Extrudability of Oil- and Resin-Base
Caulking Compounds
ASTM D2453
(2015) Standard Test Method for Shrinkage
and Tenacity of Oil- and Resin-Base
Caulking Compounds
ASTM E84
(2015b) Standard Test Method for Surface
Burning Characteristics of Building
Materials
April 2019
SECTION 07 92 00
Tinker AFB, OK
TAFB Technical Sprcifications 2019
SCIENTIFIC CERTIFICATION SYSTEMS (SCS)
SCS
Scientific Certification Systems
(SCS)Indoor Advantage
UNDERWRITERS LABORATORIES (UL)
UL 2818
1.2
(2013) GREENGUARD Certification Program
For Chemical Emissions For Building
Materials, Finishes And Furnishings
SUBMITTALS
Government approval is required for submittals with a "G" designation; submittals not having a "G" designation are for Contractor Quality Control approval. Submit the following in accordance with Section 01 33 00
SUBMITTAL PROCEDURES:
SD-03 Product Data
Sealants; G
Primers; G
Bond Breakers; G
Backstops; G
SD-06 Test Reports
Field Adhesion; G
SD-07 Certificates
Sealant; G
Primers; G
Bond Breakers; G
Volatile Organic Compounds (VOC) Content; G
SD-11 Closeout Submittals
Volatile Organic Compounds (VOC) Content ; S
1.3
PRODUCT DATA
Include storage requirements, shelf life, curing time, instructions for mixing and application, and accessories. Provide manufacturer's Material Safety Data Sheet (MSDS) for each solvent, primer and sealant material proposed.
1.4
CERTIFICATIONS
The beginning of the document. Download the full file to read on.