Bid document
Updated
A PDF document (57 KB) attached to WWYK250063 - Install React VII Facility, B9001, Post V19, from the Department of the Air Force. Due Nov 2, 2026, 2:00 PM (UTC-6).
File name: 08 81 00.pdf
The full file is for paid members, or buy this bid alone.
Preview
Tinker AFB, OK
TAFB Technical Sprcifications 2019
SECTION 08 81 00
GLAZING
PART 1
1.1
GENERAL
REFERENCES
The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI Z97.1
(2015) Safety Glazing Materials Used in
Buildings - Safety Performance
Specifications and Methods of Test
AMERICAN SOCIETY OF CIVIL ENGINEERS (ASCE)
ASCE 7
(2010; Errata 2011; Supp 1 2013) Minimum
Design Loads for Buildings and Other
Structures
ASTM INTERNATIONAL (ASTM)
ASTM C1036
(2016) Standard Specification for Flat
Glass
ASTM C1048
(2012; E 2012) Standard Specification for
Heat-Treated Flat Glass - Kind HS, Kind FT
Coated and Uncoated Glass
ASTM C1172
(2014) Standard Specification for
Laminated Architectural Flat Glass
ASTM C1184
(2014) Standard Specification for
Structural Silicone Sealants
ASTM C509
(2006; R 2015) Elastomeric Cellular
Preformed Gasket and Sealing Material
ASTM C864
(2005; R 2015) Dense Elastomeric
Compression Seal Gaskets, Setting Blocks,
and Spacers
ASTM C920
(2014a) Standard Specification for
Elastomeric Joint Sealants
ASTM D2287
(2012) Nonrigid Vinyl Chloride Polymer and
Copolymer Molding and Extrusion Compounds
ASTM D395
(2016) Standard Test Methods for Rubber
Property - Compression Set
ASTM D4802
(2016) Standard Specification for
Poly(Methyl Methacrylate) Acrylic Plastic
April 2019
SECTION 08 81 00
Tinker AFB, OK
TAFB Technical Sprcifications 2019
Sheet
ASTM E119
(2016a) Standard Test Methods for Fire
Tests of Building Construction and
Materials
ASTM E1300
(2016) Standard Practice for Determining
Load Resistance of Glass in Buildings
ASTM E2226
(2015a) Standard Practice for Application
of Hose Stream
ASTM E413
(2016) Classification for Rating Sound
Insulation
ASTM E90
(2009) Standard Test Method for Laboratory
Measurement of Airborne Sound Transmission
Loss of Building Partitions and Elements
GLASS ASSOCIATION OF NORTH AMERICA (GANA)
GANA Glazing Manual
(2009) Glazing Manual
GANA Sealant Manual
(2008) Sealant Manual
GANA Standards Manual
(2001) Tempering Division's Engineering
Standards Manual
INSULATING GLASS MANUFACTURERS ALLIANCE (IGMA)
IGMA TB-3001
(2001) Guidelines for Sloped Glazing
IGMA TM-3000
(1990; R 2004) North American Glazing
Guidelines for Sealed Insulating Glass
Units for Commercial & Residential Use
IGMA TR-1200
(1983; R 2007) Guidelines for Commercial
Insulating Glass Dimensional Tolerances
The beginning of the document. Download the full file to read on.