Bid document
Updated
A PDF document (233 KB) attached to WWYK250063 - Install React VII Facility, B9001, Post V19, from the Department of the Air Force. Due Nov 2, 2026, 2:00 PM (UTC-6).
File name: 23 07 00.pdf
The full file is for paid members, or buy this bid alone.
Preview
Tinker AFB, OK
TAFB Technical Sprcifications 2019
SECTION 23 07 00
THERMAL INSULATION FOR MECHANICAL SYSTEMS
PART 1
1.1
GENERAL
REFERENCES
The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only. At the discretion of the Government, the manufacturer of any material supplied will be required to furnish test reports pertaining to any of the tests necessary to assure compliance with the standard or standards referenced in this specification.
AMERICAN SOCIETY OF HEATING, REFRIGERATING AND AIR-CONDITIONING
ENGINEERS (ASHRAE)
ASHRAE 90.1 - IP
(2010) Energy Standard for Buildings
Except Low-Rise Residential Buildings
ASHRAE 90.1 - SI
(2010) Energy Standard for Buildings
Except Low-Rise Residential Buildings
ASHRAE 90.2
(2007; Addendum B 2010) Energy Efficient
Design of Low-Rise Residential Buildings
ASTM INTERNATIONAL (ASTM)
ASTM A167
(2011) Standard Specification for
Stainless and Heat-Resisting
Chromium-Nickel Steel Plate, Sheet, and
Strip
ASTM A240/A240M
(2016) Standard Specification for Chromium
and Chromium-Nickel Stainless Steel Plate,
Sheet, and Strip for Pressure Vessels and
for General Applications
ASTM A580/A580M
(2015) Standard Specification for
Stainless Steel Wire
ASTM B209
(2014) Standard Specification for Aluminum
and Aluminum-Alloy Sheet and Plate
ASTM B209M
(2014) Standard Specification for Aluminum
and Aluminum-Alloy Sheet and Plate (Metric)
ASTM C1126
(2014) Standard Specification for Faced or
Unfaced Rigid Cellular Phenolic Thermal
Insulation
ASTM C1136
(2012) Standard Specification for
Flexible, Low Permeance Vapor Retarders
for Thermal Insulation
April 2019
SECTION 23 07 00
Tinker AFB, OK
TAFB Technical Sprcifications 2019
ASTM C1710
(2011) Standard Guide for Installation of
Flexible Closed Cell Preformed Insulation
in Tube and Sheet Form
ASTM C195
(2007; R 2013) Standard Specification for
Mineral Fiber Thermal Insulating Cement
ASTM C450
(2008) Standard Practice for Fabrication
of Thermal Insulating Fitting Covers for
NPS Piping, and Vessel Lagging
ASTM C533
(2013) Standard Specification for Calcium
Silicate Block and Pipe Thermal Insulation
ASTM C534/C534M
(2014) Standard Specification for
Preformed Flexible Elastomeric Cellular
Thermal Insulation in Sheet and Tubular
Form
ASTM C547
(2015) Standard Specification for Mineral
Fiber Pipe Insulation
ASTM C552
(2016) Standard Specification for Cellular
Glass Thermal Insulation
The beginning of the document. Download the full file to read on.