Encl. 1 - Attachment 1 Technical Specifications dated

BSA Mechanical Basic Ordering
Agreement
Date12/29/25

Brookhaven National Laboratory
Brookhaven Science Associates
Facilities & Operations Directorate
Modernization Project Office
Upton, NY 11973

STATEMENT OF WORK

In general, work consists of, but is not limited to,

I.

The Contractor shall provide all labor, services, materials, tools and equipment to perform a variety of assigned mechanical work as required on various projects throughout the BNL site. Scope will be authorized with individual Task Orders (TOs) placed under the Basic Ordering Agreement

DRAWING INDEX

Number

Title

i

Date

Reference Drawings
None

ii

STATEMENT OF WORK

DRAWING INDEX

SECTION 000700

SECTION 000800

SECTION 000900

iii

000700S

December 2025

SECTION 000700

GENERAL CONDITIONS

GC-1.

DEFINITIONS

A.

As used in these Specifications, the following have the meaning shown opposite each: 1.

BSA

–

Brookhaven Science Associates, operator of Brookhaven
National Laboratory, and its authorized representatives of various Divisions and Departments.

2.

FOD

–

BSA’s Facilities & Operations Directorate.

3.

MPO

–

BSA's Modernization Project Office and its authorized
representative.

4.

PPM

–

Procurement and Property Management Division and its
authorized representative.

5.

BNL Site

–

Land

occupied

by

Brookhaven

National

Laboratory,

Brookhaven Township, Suffolk County, New York.
6.

Site

–

Immediate area of BNL Site assigned to Contractor for
performance of work.

7.

Work

–

Includes but is not limited to all labor, materials, tools, and equipment required and reasonably inferred by Contract to complete all construction.

8.

Contractor

–

Person or entity identified in Lump Sum Contract and
responsible for completion of all work.

9.

Subcontractor

–

Person or entity directly contracting with Contractor
including one who furnishes material worked to a special design according to Drawings and Specifications, but not including one who merely furnishes materials not so worked.

B.

Words such as provide, furnish, install, and include, mean work by Contractor. Words such as approved, directed, and inspected, mean MPO's approval, direction and inspection.

C.

In the interest of brevity, words such as "Contractor shall," have been omitted from some sections of the Specifications.

GC-2.

SCALE OF DRAWINGS

A.

Drawings are generally to scale, but Contractor shall follow indicated dimensions. Request clarification if discrepancies are noted. Scaling of drawings shall be at Contractor’s own risk.

000700S
GC-3.

December 2025

REFERENCE DRAWINGS