Amendment 4- - BID - 07 42 43 Plastic Panel

VA Project No. 833CM3030
Correct FCA Deficiencies

Camp Nelson National Cemetery, KY
100% CD2
7-8-2025

SECTION 07 46 33

COMPOSITE WALL PANELS

PART 1 - GENERAL

1.1 SUMMARY

A. Section Includes:

1. Corrugated polycarbonate wall cladding panels.
2. Accessories including fasteners, closure strips, trim, and sealants.

B. Related Sections:

1. Section 06 10 00 – Rough Carpentry
2. Section 07 60 00 – Flashing and Sheet Metal
3. Section 07 92 00 – Joint Sealants

1.2 REFERENCES

Comply with the following standards:
•
•
•
•
•
•
•

ASTM D635 – Standard Test Method for Rate of Burning of Plastics ASTM D1929 – Ignition Temperature
ASTM E84 – Surface Burning Characteristics
ASTM D638 – Tensile Properties of Plastics
ASTM D696 – Coefficient of Linear Thermal Expansion
ASTM D790 – Flexural Properties of Plastics
ASTM D1003 – Haze and Luminous Transmittance

1.3 SUBMITTALS

A. Product Data: Manufacturer’s data sheets on panels and accessories B. Samples: One 12" x 12" panel sample, showing color and profile C. Warranty: Manufacturer’s standard 10-year limited warranty

1.4 QUALITY ASSURANCE

A. Manufacturer Qualifications: Minimum 5 years of polycarbonate panel production
B. Installer Qualifications: Experience with installation of corrugated panel systems

1.5 DELIVERY, STORAGE, AND HANDLING

A. Store panels flat, out of sunlight, and covered with opaque material B. Handle to prevent scratching and edge damage

1.6 WARRANTY

A. Provide 10-year manufacturer’s warranty against UV degradation and loss of impact strength

PART 2 – PRODUCTS

2.1 MANUFACTURERS

A. Basis-of-Design: Palram “SUNTUF” Corrugated Polycarbonate Panels 1. Profile: Greca Square Wave, or Arc Wave

2. Substitutions: Permitted with prior approval

COMPOSITE WALL PANELS

SECTION 07 46 33 - 1

VA Project No. 833CM3030
Correct FCA Deficiencies

Camp Nelson National Cemetery, KY
100% CD2
7-8-2025

2.2 CORRUGATED POLYCARBONATE PANELS

A. Material: UV-resistant extruded polycarbonate

B. Thickness: 0.8 mm (nominal)

C. Panel Width: 26 inches nominal

D. Panel Length: [As required – typically 8', 10', or 12']

E. Color: Sea Green

F. Light Transmission: 60–90%

G. UV Protection: Co-extruded UV-resistant layer on outer face H. Fire Rating: Class B per ASTM E84
I. Impact Resistance: 200 times greater than glass
J. Temperature Range: -40°F to 240°F (-40°C to 115°C)

2.3 ACCESSORIES

A. Fasteners: Corrosion-resistant self-drilling screws with Neoprene or EPDMsealed washers B. Closure Strips: UV-stable foam wood, or plastic to match panel profile