Amendment 4-SED FCA - Camp Nelson

LEGEND

X

NOTES

X

EXISTING FENCE TO BE RE-COATED

B. PROPER PRECAUTIONS SHALL BE TAKEN TO AVOID

DAMAGE TO THE FENCE.

SUBMITTALS

1. PRODUCT DATA:

C. AFTER PREPARATION IS COMPLETE, LEVEL ACCUMULATED

MEDIA.

A. SUBMIT MANUFACTURER'S DESCRIPTIVE LITERATURE

FULLY DESCRIBING EACH PRODUCT AND SOLIDS BY

VOLUME CONTENTS.

QUALIFICATIONS

C. SUBMIT MANUFACTURER'S PRODUCT DATA SHEETS.

WORK SHALL BE PERFORMED BY SPECIALTY SUBCONTRACTOR,

EXPERIENCED WITH APPLICATION OF MATERIALS SPECIFIED &

BLAST GRIT CONTAINMENT. SUBMIT SUBCONTRACTOR AND

COATING SUPERINTENDENT QUALIFICATIONS FOR APPROVAL

PRIOR TO CONSTRUCTION.

D. SUBMIT SPECIAL COATING SCHEDULE INDICATING

LOCATIONS AND APPLICATIONS BY

MANUFACTURER'S NAME AND PRODUCT NUMBER.

A. CLASS 3 CONTAINMENT OR HIGHER IS REQUIRED FOR

AREAS DESIGNATED ON DRAWINGS TO CONTAIN ALL

DEBRIS WITHIN PROJECT SITE AND TO PREVENT DEBRIS

FROM ENTERING NEARBY ROAD, VEHICLES, OR BUILDINGS.

3. APPLICATION:

A. APPLY MATERIALS AT SPECIFIED FILM THICKNESS BY

METHOD RECOMMENDED BY MANUFACTURER. MAKE

FINISH COATS SMOOTH, UNIFORM IN COLOR, AND FREE

OF BRUSH MARKS, LAPS, RUNS, DRY SPRAY, OVERSPRAY

AND SKIPPED OR MISSED AREAS.

2. SAMPLES:

A. SUBMIT MANUFACTURER'S STANDARD AND PREMIUM

COLORS, TO MATCH EXISTING COLORS.

B. APPLY ALL COATINGS IN STRICT ACCORDANCE WITH

MANUFACTURER'S LATEST PRINTED AND PUBLISHED

INSTRUCTIONS.

B. SUBMIT TWO (2) 12” X 12” SAMPLES OF EACH COATING

SYSTEM IN SELECTED COLORS ON SUBSTRATE SAMPLE TO

BE FINISHED.

C. PROVIDE “WET PAINT” SIGNS AS REQUIRED TO PROTECT

NEWLY COATED FINISHES. REMOVE TEMPORARY

PROTECTIVE WRAPPINGS PROVIDED BY OTHER FOR

PROTECTION OF THEIR WORK, AFTER COMPLETION FOR

PAINTING OPERATIONS. PROTECT ALL SURFACES NOT TO

BE PAINTED.

C. INDICATE FINISH TEXTURE AND COLOR.

3. CERTIFICATES:

A. MANUFACTURER'S CERTIFIED TEST REPORT FROM

ACCEPTABLE INDEPENDENT TESTING LABORATORY

INDICATING COATINGS COMPLY WITH PERFORMANCE

REQUIREMENTS.

B

A

B. INCLUDE MANUFACTURER'S RECOMMENDATIONS FOR

MIXING, THINNING, APPLICATION AND CURING.

A

01 BLAST AND RECOAT EX. PEELING FENCE (SEE NOTES)

CONTAINMENT:

D. REMOVE DEBRIS FROM JOBSITE AND LEAVE STORAGE

AREAS CLEAN. REPAIR DAMAGE TO COATING OR

SURFACES CAUSED BY CLEANING OPERATIONS.

B

KEYNOTES

QUALITY ASSURANCE

4. PAINTING SCHEDULE:

W

1. JOB MOCK-UP:

A. COATING SYSTEM

· 1ST COAT TNEMEC SERIES 66 EPOXOLINE

2.0-3.0 DRY MILS

· 2ND COAT TNEMEC SERIES 1072 FLUORONAR

2.5-3.0 DRY MILS

W

A. MINIMUM 6 FT FENCE SECTION APPLICATION OF EACH

SPECIFIED COATING SYSTEM ON EACH TYPE OF

SUBSTRATE.

D

D

D

B. MOCK-UPS WILL SERVE AS STANDARD FOR ACCEPTANCE

OF WORK.

JOB CONDITIONS

C. LEAVE APPROVED MOCK-UPS IN PLACE AS PART OF