Appendix B1 TAFB General Requirements Div 00-01

Tinker AFB

Tinker General Requirements

00 70 00

GENERAL REQUIREMENTS FOR CONSTRUCTION ON TINKER AIR FORCE BASE

PART 1

1.1

GENERAL

REFERENCES

The publications listed below form a part of this specification to the extent referenced. The publications are referred to in the text by basic designation only. The most current edition of the listed publications at the time of contract/delivery order award shall be used.

NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)

NFPA 241

(2022) Standard for Safeguarding
Construction, Alteration, and Demolition
Operations

NFPA 51B

(2019; TIA 20-1) Standard for Fire
Prevention During Welding, Cutting, and
Other Hot Work

NFPA 55

(2016; TIA 16-1; TIA 16-2) Compressed
Gases and Cryogenic Fluids Codes

NFPA 70

(2020; ERTA 20-1 2020; ERTA 20-2 2020; TIA

20-1; TIA 20-2; TIA 20-3; TIA 20-4)

National Electrical Code

NFPA 72

(2019; TIA 19-1; ERTA 1 2019; TIA 21-1;
ERTA 1 2021) National Fire Alarm and
Signaling Code

TINKER AIR FORCE BASE (TAFB)

TAFBI 13-204

(2021) Airfield Operations

TAFB Plan 31-101

Integrated Defense Plan

TAFB Outage SOP

(2022) Planned and Emergency Outages
Standard Operating Procedures

U.S. AIR FORCE (USAF)

DoDI O-2000.16v1_AFI 10-245-O

(2020) Antiterrorism (AT) Program
Implementation

AFI 48-104

(2019) Tobacco Free Living

AFMAN 91-203

(2018; with Guidance Memorandum, 2021) Air
Force Occupational Safety, Fire, and
Health Standards

U.S. DEPARTMENT OF DEFENSE (DOD)

UFC 3-260-01
January 2022

(2019; with Change 1, 2020) Airfield and

Section 00 70 00

Tinker AFB

Tinker General Requirements

Heliport Planning and Design
UFC 3-600-01

(2016; with Change 6, 2021) Fire
Protection Engineering for Facilities

UFC 3-601-02

(2021) Fire Protection Systems Inspection,
Testing, and Maintenance

U.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)

29 CFR 1910-SUBPART Q

Welding, Cutting, and Brazing

29 CFR 1926

Safety and Health Regulations for
Construction

1.2

SUBMITTALS

Government approval is required for submittals with a "G" designation; submittals not having a "G" designation are for Contractor Quality Control approval. Submit the following in accordance with Section 01 33 00

SUBMITTAL PROCEDURES:

SD-01 Preconstruction Submittals
Entry Access List; G
Key Issue Receipt
SD-06 Test Reports
Fire Alarm Pre-Construction Testing Record; G
SD-07 Certificates
Welding, Cutting and Brazing Permit; G
Framed Instructions
SD-11 Closeout Submittals
Key Return Receipt
1.3
1.3.1

WORK REQUIREMENTS

Security/Contractor Identification Badges